1. <th id="9tgkc"><address id="9tgkc"></address></th>


        1. 宜賓紅星敏感電器有限公司

          地址:四川省宜賓市高縣工業園區福溪功能區1號廠房

          電話:0838-2511895

                0838-2502506
            
          手機:15308258393
             13340858576
          傳真:0838-2511895
             0838-2502506
          郵箱:0838-2511895@qq.com

          產品展示
          • 商品名稱: 臭氧發生片
          • 商品編號: c01
          • 上架時間: 2012-12-05
          • 瀏覽次數: 653

            產品特點Feature of product

            FCY系列高效陶瓷臭氧發生片采用了目前國際上先進的“高頻陶瓷沿面放電生成臭氧技術”,選用高鋁陶瓷作為發生片的基體,以特制電極材料,經絲網印刷及高溫燒結制成,產品具有高機械強度、高耐壓、體積小、臭氧發生量大、耗電小、壽命長等特點, 并符合RoHS要求。

            FCY series high efficiency ceramic ozone generating plate used advanced ‘high frequency ceramic along face discharge technique’ at world. High alumina ceramic is used as base of the ozone generating plate. This product is manufactured by screen printing and high temperature sintering with a special made electrode material. It has features such as high mechanical strength and dielectric strength, small volume, large ozone generating capacity, low power consumption and long life, etc. The products accord to RoHS requirement.

            使用說明Definition of use

            陶瓷高效臭氧發生器件使用方便,只須接上專用配套的高頻高壓電源,即可正常工作。連接方式有焊接式和插入式兩種,焊接式臭氧片背面有兩個焊點或焊條,將高頻高壓電源的高壓輸出端焊接到臭氧片上即可(不分極性);插入式臭氧片有插頭和插座,將高頻高壓電源的高壓輸出端插到臭氧片的插座上,然后將臭氧片插頭插入插座即可(不分極錯誤!鏈接無效。。

            Use of this device is very convenient. When it is connected to high frequency high voltage power, the device may normal work. Methods of connecting have welding type and inserted type. Welding type ozone generating plate has two points or welding stick, the output terminal of the power is connected with welding point or welding stick of the ozone generating plate ( no polar ). Inserted type ozone generating plate has plug and socket, the output terminal of the power is plugged to the socket of the ozone generating plate ( no polar ).

            注意事項Points for attention:

            ● 運輸、安裝、焊接、使用臭氧發生片時,請勿摔砸、撞擊、切勿用硬器劃傷正面和背面電極;

            ● 與高壓電源連接時,應焊接良好,經檢測應無打火、虛接現象;

            ● 焊接式臭氧片在與引線進行焊接時,應使用恒溫<25W電烙鐵,焊接應快速完成,避免因局部突然受熱造成臭氧片斷裂,或因瓷片端頭可焊部位長時間受高溫而使電極脫落;

            ● 插拔直插式臭氧片時,應手持插頭進行,不應手持臭氧片主體;

            ● 臭氧片工作時,溫度略有升高,這是正?,F象,加大空氣(氧氣)流量,可降低溫度。若使用冷干機進行氣源預處理,則臭氧片工作效果更好;

            ● 使用環境不應有易燃易爆物品;

            ● 請置于干燥處儲藏保存。

            ● When the ozone generating plate is transported, welded, installed and used,please not fall and impulse the ceramic plate, and not cut the electrodes on the ceramic plate by a hard article.

            ● When the ozone generating plate is connected to the power, should take good welding.

            ● When the leads are welded, the constant temperature electric iron (<25w )must be used to avoid fracture of the ceramic plate and shedding of the electrodes.

            ● When inserting or drawing the ceramic plate, the plug should be held by hand, should not hold the base of ceramic plate.

            ● When the ozone generating plate operating, its temperature will slightly rise. It increase flow of air ( oxygen ), may down temperature of the ozone generating plate. If a day cooling machine is used for pretreatment of the air supply, high efficiency can be achieved.

            ● In operating place, should not exist a inflammable cargo and explosive cargo.

            ● Please store at a dry place.

            技術參數Technical parameter

          型號
          Tape

          基本尺寸
          Base size
          (mm)

          固有電容量
          Natural capacity
          (PF)

          耐壓
          Dielectric strength (KV)

          產率
          Generating rate
          (mg/h)

          安裝方式   
          Mounting mode

          平均無故障工作時間
          Average no fault operating time( K h )

          FCY-0005

          Φ16

          2

          4

          5

          卡式或錫焊

          >8千小時

          FCY-0030

          19×15×0.64

          3

          4

          30

          錫焊

          >8千小時

          FCY-0050

          25×10×0.47

          5

          4

          50

          錫焊

          >8千小時

          FCY-0110C

          37×15×0.64

          10

          6

          100

          卡式或錫焊

          >8千小時

          FCY-0150

          50×15×0.64

          20

          6

          150

          卡式或錫焊 Clamping or tin soldering

          >8千小時

          FCY-0180

          60×15×0.64

          22

          6

          180

          卡式或錫焊 Clamping or tin soldering

          >8千小時

          FCY-0210

          70×15×0.64

          25

          6

          200

          卡式或錫焊 Clamping or tin soldering

          >8千小時

          FCY-0300

          49×25×1

          30

          8

          300

          錫焊 Tin soldering

          >8千小時

          FCY-0500

          50×30×1

          35

          8

          500

          直插

          >8千小時

          FCY-0500P

          50×30×1

          35

          8

          500

          錫焊Tin soldering

          >8千小時

          FCY-0500A

          60×50×1

          35

          8

          500

          直插

          >8千小時

          FCY-0600

          70×27×1

          65

          8

          600

          卡式或錫焊Clamping or tin soldering

          >8千小時

          FCY-1100

          70×40×1

          80

          8

          1000

          直插 Direct inserting

          >8千小時

          FCY-1100P

          70×40×1

          80

          8

          1000

          錫焊 Tin soldering

          >8千小時

          FCY-1000

          70×30×1

          45

          8

          1000

           

          >8千小時

          FCY-3500

          90×50×1

          120

          8

          3500

          直插Direct inserting

          8千小時

          FCY-3500P

          90×50×1

          120

          8

          3500

          錫焊 Tin soldering

          >8千小時

          FCY-3500A

          115×52×0.64

          150

          6

          3500

          錫焊 Tin soldering

          >8千小時

          FCY-3500B

          115×66×1K5

          120

          8

          3500

          錫焊Tin soldering

          >8千小時

          FCY-3500D

          90×50×1

          120

          8

          3500

           

          >8千小時

          FCY-5000

          115×66×1

          340

          8

          5000

          直插 Direct inserting

          >8千小時

          FCY-7000

          152×92×1

          400

          8

          7000

          直插Direct inserting

          >8千小時

          FCY-10000

          165×95×1

          500

          8

          10000

          直插 Direct inserting

          >8千小時

            備注Notes

            ● 表中的臭氧產率是一個參考值,是指以空氣為氣源的臭氧產率,它與空氣在陶瓷片表面的流量,空氣中的含氧量、溫度、濕度、工作電壓、工作頻率、電源與瓷片的匹配度等工作條件有關。

            ● 工作環境(供氣條件):溫度<50℃,相對濕度<80℃RH。若用冷干空氣為氣源,則工作效果更好。

            ● 臭氧檢測方法為中性碘化鉀法,按CJ/T3028.1-2-94標準檢測。

            ● In above tab. ozone generating rate is a reference value with air as gas supply. This ozone generating rate is related to the air flow on ceramic surface, temperature, operating voltage, operating frequency and matching condition for the power to the ceramic plate.

            ● Service condition ( air supply condition ): Temperature ≤50℃, Relative humidity ≤80%.

            ● Test way for ozone is neutral potassium iodide method according CJ/ T3028, 1-2-94 standard.